M3i Zero sakura General Album
Page : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15ALL
MicroSD in on the picture below.
Now take the USB power cable and plug it in your M3i Zero. Plug the thin contact of the USB power cable in the small hole of your card, and the USB connector to your PC.
I’ve made a picture, so you can see how you should connect the thin contact to your card. Do this very gentle, as a wrong move can break the fragile contact.
So now you have your MicroSD in your M3i Zero and the USB power cable is connected to your M3i Zero. Now just plug the USB part of the USB power cable in your PC.
If you have done all these things correctly, a red light should start flashing. After 10-15 seconds, the light will stop flashing, indicating that the process is done. You can now unplug the USB power cable from your PC.
I’ve listed all the things the light may do and what it means:
Light blinks – in progress
Light off
